“Recently did work on our house (new siding and added a portico). They did a great job, were courteous, professional and very fair with pricing. Would highly recommend.”
Kitchen Remodeling
Kitchen Remodeling in Southeast Massachusetts.
A kitchen remodel is the most disruptive project a household takes on. We handle layout planning, demo, plumbing, electrical, cabinets, counters, tile, and finish work as a single crew, start to handoff. No subcontractor handoffs that drag the timeline. Glenn walks the job most days. Our published range is $12,000-$75,000 per project, and the walk-through and written estimate are free.
A kitchen remodel with CW Services LLP runs $12,000 to $75,000 and moves through five stages: (1) a walk-through and written estimate, usually sent the same week; (2) design and material selection, done in your kitchen with real samples, no showroom trip required; (3) demo and rough-in, with plumbing and electrical inspected before drywall closes anything in; (4) cabinets, counters, and finishes installed and templated; and (5) a punch list and handoff backed by a written one-year workmanship warranty. The real choice most homeowners weigh is this: a handyman is cheaper for one small fix but carries no warranty and pulls no permits; a large design-build firm brings a showroom and a designer at a markup you pay for; a family-run licensed contractor like this one sits between them, with one crew and Glenn on site most days. This is not the right fit if you want the lowest bid on the street, if your home is outside the 14 towns we serve, or if you need a same-day emergency repair rather than a planned remodel. The takeaway: get the free estimate, usually written within a week, and compare it line by line against anything else you have been quoted.
- Cost range
- $12,000-$75,000
- Typical timeline
- 4-8 weeks
- What we handle
- 5+ project types
Quick answer
Kitchen Remodeling in Southeast Massachusetts from CW Services LLP runs $12,000-$75,000 per project (our published price), with a typical timeline of 4-8 weeks. Glenn and his crew handle every trade in-house with licensed electrical and plumbing partners. Every project carries a written 1-year workmanship warranty, MA HIC license, and $2M general liability.
Free walk-through within 3-5 business days, written estimate the same week, and same crew start to handoff. Call (774) 623-9476 or request a free estimate.
What we do
Project types.
CW Services LLP handles 5 types of kitchen remodeling work in Southeast Massachusetts, from full kitchen remodel to custom built-ins. Pricing typically runs $12,000-$75,000 per project, depending on scope and finish level. Glenn scopes the right project type during a free walk-through and writes the estimate the same week.
Full kitchen remodel
Layout, cabinets, counters, tile, plumbing, electrical, paint.
Cabinet refresh
New doors, hardware, paint or stain, keep the boxes, change the look.
Counter & backsplash
Quartz, granite, or butcher block. Templated, fabricated, installed.
Layout reconfiguration
Move walls, relocate appliances, open up to dining or living.
Custom built-ins
Pantries, banquettes, coffee bars, range hood surrounds.
Process
From walk-through to handoff.
A kitchen remodeling project at CW Services LLP runs in 5 stages: walk-through & estimate, design & material selection, demo & rough-in, cabinets, counters, finishes, punch list & handoff. Glenn walks the home, writes the estimate the same week, pulls every permit, and the same crew handles every trade through finish. Typical timeline is 4-8 weeks, with a written 1-year workmanship warranty included.
- 01
Walk-through & estimate
Glenn visits the home, measures, asks how the family actually uses the kitchen, and writes the estimate the same week.
- 02
Design & material selection
We bring sample doors, counters, and tile to your kitchen. No showroom trips required. You sign off before anything is ordered.
- 03
Demo & rough-in
Plastic dust walls, daily clean-up, plumbing and electrical rough-in inspected before drywall closes anything in.
- 04
Cabinets, counters, finishes
Cabinets installed and shimmed level, counters templated and installed, backsplash and trim tied in last for a clean line.
- 05
Punch list & handoff
We do the punch list before you do, final clean, fixture testing, walk-through with Glenn, and a written one-year workmanship warranty.
FAQs
Common questions.
If your question isn’t answered here, call or text Glenn at (774) 623-9476.
How long does a kitchen remodel take?
A typical full kitchen runs 4-8 weeks from demo to handoff. Cabinet-only refreshes are usually 5-10 days. We give you a written schedule before we start and update it weekly.
Will I have a working kitchen during the project?
We set up a temporary kitchen, usually fridge, microwave, and a sink in the basement or dining room, so meals stay manageable. Most families don't eat takeout for the whole project.
Do you handle permits and inspections?
Yes. We pull every permit, schedule every inspection, and meet the inspector on site. Your only paperwork is signing the contract.
Can I supply my own cabinets or appliances?
Absolutely. Many clients buy appliances directly from the manufacturer or pick a cabinet line they've researched. We coordinate delivery dates so nothing sits in your garage for weeks.
What does it cost?
A refresh of a 10x12 kitchen with mid-grade cabinets runs $18-$28K. A full reno with custom cabinets and quartz tops in a larger space runs $45-$75K. We give you a real number, not a range, after a 30-minute walk-through.
Planning guide
Before you call about kitchen remodeling.
Complete kitchen transformations from design to final install. Settling the four questions below before the walk-through makes the kitchen remodeling estimate faster and closer to what you actually want, because Glenn can price the job you have decided on instead of a guess at it.
What should you decide before Glenn walks through?
Decide how your family actually cooks and gathers before the walk-through, not during it. Think about whether you want to keep the current layout or open it to the dining or living space, whether an island fits, and how much storage you are missing today. Walk your own kitchen at breakfast, dinner prep, and cleanup and note where people bump into each other. Bring any inspiration photos, but be ready to say which parts of those photos actually matter to you versus which parts just look nice. Glenn will ask how the family uses the room, so having real answers ready, not just a mood board, makes the estimate visit shorter and the resulting plan closer to right the first time.
What should you ask about cabinets, counters, and finishes?
Ask whether you are keeping the cabinet boxes and refreshing doors and hardware, or replacing everything, since that single choice drives most of the rest of the plan. Ask what counter material fits your cooking habits, since quartz, granite, and butcher block behave differently under heat, knives, and daily wear. Ask how samples are chosen, since CW brings doors, counters, and tile to your home rather than sending you to a showroom, so you can see them under your own lighting. Ask what happens if you want to supply your own appliances or a cabinet line you researched yourself, since coordinating delivery dates matters so nothing sits boxed in the garage.
How should you prepare the house before demo starts?
Clear out everything you want kept from cabinets, drawers, and nearby closets before demo day, since dust and debris reach further than most homeowners expect. Set up wherever you plan to eat during the project, whether that is a spare room or basement, and confirm it has power for a fridge and microwave. Talk through pets and kids' routines with the crew so everyone knows which doors stay closed and which paths stay clear. Ask where dust walls will go and how daily clean-up works, since a kitchen remodel runs through the busiest room in the house and a clear plan for living around it matters as much as the finishes themselves.
What should you confirm about permits and the handoff?
Confirm which permits the project needs and who is pulling them, since plumbing and electrical work in a kitchen almost always requires inspection before drywall closes anything in. Ask to see the written schedule before work starts and how often it gets updated, so surprises are rare. Before handoff, walk the space yourself and test every fixture, drawer, and door rather than trusting a quick glance. Ask what the written workmanship warranty covers and for how long, and keep the paperwork somewhere you can find it later. A clear punch list and a documented walk-through are what turn a finished kitchen into one you trust.
What actually drives the scope of a kitchen project?
Scope in a kitchen is driven less by square footage and more by how much you are moving. Keeping the sink, stove, and fridge roughly where they sit today is a smaller scope than relocating plumbing or gas lines to a new layout. Structural changes, taking out a wall between the kitchen and dining room, or adding a window, pull in framing and sometimes an engineer, which changes both the plan and the sequence of work. Cabinet and appliance choices matter too, since custom sizing and specialty appliances often need longer lead times than stock options. Naming your must-haves separately from your nice-to-haves early lets the plan flex around budget without losing what matters most to you.
How does a kitchen remodel affect the rest of the house?
A kitchen sits at the center of most household traffic, so work there touches more of the house than the room itself suggests. Plumbing and electrical often share lines with a nearby bathroom or laundry area, so those fixtures may be briefly offline during rough-in. Dust travels through shared hallways and HVAC returns, so nearby rooms need protection even if they are not part of the project. If the kitchen opens to a dining or living space, expect furniture in those rooms to shift or get covered for the duration. Talking through these ripple effects before demo starts helps the rest of the household plan around a project centered in one room but felt throughout the home.
How can you tell a rushed kitchen job from a quality one?
A rushed kitchen shows in the details that get skipped under time pressure, cabinets that are not shimmed level, backsplash tile that does not align with outlets and switches, caulk lines around the sink and counter that look uneven. Quality work shows in sequencing, plumbing and electrical rough-in gets inspected before drywall closes it in, rather than covered up to save a day. Check that drawers and doors close smoothly and evenly, that counter seams are tight and level, and that outlets and light switches line up with the cabinet layout rather than being an afterthought. A crew that walks the punch list before you do, and fixes it without being asked, is usually the same crew doing the careful work underneath.
What should you ask any contractor before hiring for a kitchen?
Ask who is actually on site running the job day to day, since a kitchen with one crew and one foreman moves differently than one handled by rotating subcontractors. Ask how plumbing and electrical rough-in gets inspected before drywall closes it in, and ask to see that step rather than take it on faith. Ask what happens if something unexpected turns up once demo starts, old wiring, plumbing that does not match the plan, and how that gets priced and communicated. Ask for references or examples of finished kitchens similar in scope to yours. Ask directly whether the same crew that starts the job finishes it, since consistency in the people doing the work often shows up in the finished result.
Choosing a contractor
DIY vs handyman vs CW Services.
For a kitchen remodeling project, here’s the honest tradeoff. Some scopes really are best handled by a handyman. Some truly should be DIY.
Pulls permits & meets inspectors
DIYNoHandymanPartialCWYesLicensed for structural changes
DIYNoHandymanNoCWYesCoordinates licensed electrical & plumbing
DIYNoHandymanPartialCWYesWritten estimate, line-itemed
·DIYn/aHandymanPartialCWYesSame crew start to handoff
·DIYn/aHandymanNoCWYesWritten 1-yr workmanship warranty
DIYNoHandymanNoCWYesInsurance + workers comp on every employee
DIYNoHandymanPartialCWYesEPA Lead-Safe certified (pre-1978 homes)
DIYNoHandymanNoCWYesDaily clean-up + dust control
DIYPartialHandymanPartialCWYesHonest about scope creep before extra work
·DIYn/aHandymanPartialCWYes
Honest answer: a handyman is right for a leaky faucet or trim repair. A licensed GC is right for moving plumbing, walls, or systems. We’ll tell you straight, and refer you out when we’re not the right fit. Not sure which your project needs? Ask for a free walk-through.
Reviews
Same crew. Same standard. Years of receipts.
“I hired CW for multiple projects and Glen is so easy to work with. There pricing has been totally reasonable. They are always on time and do excellent work. I will hire him for any future projects!”
“They did work on my home they were very reliable and kind. The work was great! I had a wonderful experience and Highly recommend them!”
“Glen painted, repaired and built a privacy fence on my deck. It all came out great! Thanks Glen!”
Also serving
Kitchen Remodeling, town by town.
Pick your town for local pricing, permit notes, and recent kitchen remodeling work nearby.
Related
Other services we handle.
Ready to talk through your project?
Free estimate. Written same week. Glenn walks the project, Megan handles scheduling. No pressure, no salesperson.